Hot tags
Clear filter
Loading...
OpenWrt Multi-Dial on a Single Line: Combining Bandwidth with mwan3

OpenWrt Multi-Dial on a Single Line: Combining Bandwidth with mwan3

Dial several PPPoE connections over one broadband line and combine them with mwan3 load balancing. This guide gives the full macvlan and mwan3 configuration, and focuses on the side effects multi-dial has on IPTV, IPv6, and remote NAS access.

Multicast to Unicast on a NAS: Choosing Between udpxy, msd_lite, and rtp2httpd

Multicast to Unicast on a NAS: Choosing Between udpxy, msd_lite, and rtp2httpd

Use your NAS to convert carrier IPTV multicast into unicast streams, so phones, computers, and TVs can all watch live TV without a set-top box. This article compares the three mainstream options — udpxy, msd_lite, and rtp2httpd — with ready-to-use docker-compose configurations and a complete troubleshooting flow.

How to Read the NAS CPU Ladder: Getting 138 Real-World Benchmarks Right

How to Read the NAS CPU Ladder: Getting 138 Real-World Benchmarks Right

The CPU ladder is not a copied spec sheet: it is real-device testing of 138 CPUs. This article explains where the data comes from, how the progress-bar segments work, the ground rules for comparing ARM with x86, and a quick-reference table of representative CPUs at every tier.

Intel N100 NAS Complete Guide: Benchmarks, Model Picks, and Deployment Advice

Intel N100 NAS Complete Guide: Benchmarks, Model Picks, and Deployment Advice

The N100 is the de facto standard for a home NAS right now: 94,389 CoreMark measured, 6W TDP, AV1 hardware decoding. This guide covers what it can and cannot do, six head-to-head comparisons, prebuilt vs DIY options, a recommended build, and an FAQ.

The Complete NAS RAID Guide: Choosing Between RAID 0/1/5/6/10 and SHR

The Complete NAS RAID Guide: Choosing Between RAID 0/1/5/6/10 and SHR

RAID sets the boundaries of your NAS capacity, performance, and safety. This guide lays out the differences between RAID 0/1/5/6/10 and SHR in one table, with a decision tree by bay count, the maths behind the three layers of capacity shrinkage, and a list of pitfalls to avoid.

How to Choose a NAS CPU: 2026 Buying Guide with Rankings, Power Draw, and Use Cases

How to Choose a NAS CPU: 2026 Buying Guide with Rankings, Power Draw, and Use Cases

The easiest mistake when buying a NAS is picking the wrong CPU tier. This guide recommends a tier for each use case and reviews popular chips like the N100, J4125, V1500B, and RK3588 using real CoreMark data, so you buy by need instead of wasting money.

Bridge Your Optical Modem in 10 Minutes

Bridge Your Optical Modem in 10 Minutes

China Mobile gigabit broadband for just 38 yuan a month! This guide walks through switching your optical modem from router mode to bridge mode, removing double NAT and improving stability, with full steps, pitfalls, and an FAQ.

Only 13% of Broadband Connections Are NAT1: The Complete List of Full Cone Routers

Only 13% of Broadband Connections Are NAT1: The Complete List of Full Cone Routers

Online test data shows NAT1 accounts for only about 13% of home broadband connections, with NAT3 at 61%. This guide explains what NAT type affects, why NAT1 is so rare, the prerequisites for enabling it (including bridging the optical modem), and a full list of routers and firmware that support Full Cone NAT.

IPv6 vs IPv4: A Deep Dive into the Core Differences and Benefits, Plus a Step-by-Step Guide to Enabling IPv6 on Every Platform

IPv6 vs IPv4: A Deep Dive into the Core Differences and Benefits, Plus a Step-by-Step Guide to Enabling IPv6 on Every Platform

A deep dive into the core differences between IPv4 and IPv6, and the enormous advantages IPv6 brings for public IP addresses, low-latency gaming, and P2P downloads. Includes step-by-step guides to enabling IPv6 on Windows, Mac, Linux, and TP-LINK routers, plus an advanced tip for changing IPv4 priority — everything you need to leave NAT restrictions behind and get fast NAS remote access and home-server connectivity.

IPv4 vs IPv6: A Deep Comparison — Say Goodbye to NAT Traversal, Essential Reading for Public NAS Access

IPv4 vs IPv6: A Deep Comparison — Say Goodbye to NAT Traversal, Essential Reading for Public NAS Access

An in-depth 2025 analysis: why must the internet move from IPv4 to IPv6? This article compares the two across technical principles, routing efficiency, security, and real-world performance tests (APNIC data). It also unpacks IPv6's huge advantages for IoT, 5G, and eliminating NAT, plus what real network speeds look like during the current transition.

No Public IPv4? Enable IPv6 on Home Broadband and Configure Your Router Firewall

No Public IPv4? Enable IPv6 on Home Broadband and Configure Your Router Firewall

ISPs are reclaiming public IPv4 addresses, so IPv6 is now the practical route to remote access. This step-by-step guide covers bridging the optical modem, IPv6 dual-stack dial-up on the router, DDNS with DDNS-GO, firewall and port allowances, and iStoreOS tips for reliable remote NAS access.

Wangxin Cloud OEC-turbo: The New Junk-Pile Champion, Flashed with Armbian to Become a Lightweight NAS

Wangxin Cloud OEC-turbo: The New Junk-Pile Champion, Flashed with Armbian to Become a Lightweight NAS

In 2024 the carriers went to war over PCDN and edge-computing businesses of every stripe took a hit. The "mining crash" was merciless, but scrap-box hunters were thrilled: the Wangxin Cloud OEC has become the new junk-pile champion. It looks almost identical to the PlayCloud, and once flashed with Armbian it unlocks a lightweight NAS, an OpenWrt bypass router, a Xunlei download box, and more.